Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
ZFX-M302 AC100-240V DC 12V 550MA Switching Power Module — image 1
Hover to zoom

1 / 3 · Click to enlarge

ZFX-M302 AC100-240V DC 12V 550MA Switching Power Module

35+ bought in past month
AI Summary
AC to DC Power Supply Module for everyday users

The ZFX-M302 AC100-240V DC 12V 550MA Switching Power Module is a value-for-money ac to dc power supply module designed for everyday users. It features Output Voltage: 12 and Output Current (A): 0.55.

₹695
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹695
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Output Voltage: 12
Output Current (A): 0.55
Input Voltage (VAC): 100 ~ 240
Length (mm): 40
Width (mm): 30
Weight (g): 30

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-890249Category: AC to DC Power Supply Module

About This Product

The ZFX-M302 AC100-240V DC 12V 550MA Switching Power Module is a value-for-money ac to dc power supply module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Output Voltage: 12 — works with standard household power
  • Output Current (A): 0.55
  • Input Voltage (VAC): 100 ~ 240 — works with standard household power
  • Length (mm): 40
  • Width (mm): 30
  • Weight (g): 30
  • Shipping Weight: 0.033 kg
  • Shipping Dimensions: 6 × 4 × 3 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This high-Quality DC 12V 550mA Adapter with AC 100-240V Input range. It is widely used for LED Driver and as a Switched-mode power supply (SMPS) for various devices that required 12V with low current. This is an advanced power supply and better than conventional ones. If you want low losses and stable output also you don’t want to make a rectifier, so go for this switching power supply module. This is a high-quality AC to DC Switching Power Adapter which gives a clean regulated 12 VDC output at up to 50mA. These adapter work with 240/220VAC input, allowing them to work with household supply.


Features :

  1. PWM design, make sure the stability and high efficiency of power supply.
  2. Anti-jamming, passed EMC test, wave less than 20MV.
  3. Efficiency above 80%, exotherm less than 25 degree
  4. Function: with overvoltage protection, short-circuit protection, overload protection
  5. Non-waterproof
  6. Constant voltage output assumes a stable power supply for LED lightings to reach a long lifetime and reduce led to light decay.

Package Includes :

1 x ZFX-M302 AC100-240V DC 12V 550MA Switching Power Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.