Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Wireless Zigbee CC2531 Sniffer Bare Board — image 1
Hover to zoom

1 / 3 · Click to enlarge

Wireless Zigbee CC2531 Sniffer Bare Board

28+ bought in past month
AI Summary
xBee Zigbee modules for everyday users

The Wireless Zigbee CC2531 Sniffer Bare Board is a value-for-money xbee zigbee modules designed for everyday users. It features Model No. / Name: CC2531 and Frequency (GHz): 2.4.

wireless convenience
₹935
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹935
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: CC2531
Frequency (GHz): 2.4
Wireless Speed Rate: 250Kbaud
Power Consumption (W): <20mA (receiving) <25mA (transmission)
No. of I/O pins: 8
Length (mm): 56

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-835847Category: xBee Zigbee modules

About This Product

The Wireless Zigbee CC2531 Sniffer Bare Board is a value-for-money xbee zigbee modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: CC2531
  • Frequency (GHz): 2.4 — smooth, flicker-free operation
  • Wireless Speed Rate: 250Kbaud
  • Power Consumption (W): <20mA (receiving) <25mA (transmission)
  • No. of I/O pins: 8
  • Length (mm): 56
  • Width (mm): 16
  • Weight (g): 3

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This Wireless ZigbeeCC2531 Sniffer Bare Board is based on a CC2531 chip, which can be used to create a custom DIY Zigbee gateway using Zigbee protocol. Which can be used by any other device using Zigbee communication protocol.

Features:

  1. Lead Out 8 IO Ports
  2. Debug Pin
  3. Matching Firmware To Achieve Analyzer Function

Package Includes:

1 x Wireless Zigbee CC2531 Sniffer Bare Board

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.