Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band — image 1
Hover to zoom

1 / 6 · Click to enlarge

Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band

AI Summary
Board & Shield for everyday users

The Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band is a mid-range board & shield designed for everyday users. It features One Package Weight: 0.02kgs / 0.05lb and One Package Size: 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch.

₹2,077
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,077
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.02kgs / 0.05lb
One Package Size: 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch
Best Sellers Rank (Consumer Electronics): #4437
Best Sellers Rank (Consumer Electronics > Electronics Module): #168
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #70

Ideal For

Everyday convenience
Share:
SKU: S-DIY0235Category: Board & Shield

About This Product

The Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.02kgs / 0.05lb
  • One Package Size: 15cm * 12cm * 1cm / 5.91inch * 4.72inch * 0.39inch
  • Best Sellers Rank (Consumer Electronics): #4437
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #168
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #70

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

About The Product The Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network. 1. New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278 2. EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server 3. Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico) Specifications 1. RF chip: SX1262 2. Frequency range: EU868 (863~870MHz) 3. Modulation: LoRa/(G)FSK 4. Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK) 5. Emit power: More than 14dBm 3.3V 6. Spreadind factor: SF5 ~ SF12 7. Operating voltage: 3.3V 8. Module power consumption: Emitting current: 45mA 14dBm; receiving current: 5.3mA 125KHz 9. Communication bus: SPI 10. Operating temperature: -40 ~ 85 degree C 11. Connector: Castellated edge / solder holes 12. Dimensions: 21.00 x 52.00mm

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.