Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
WAVESHARE 65K Colors 160 x 80 Pixel 0.96 inch LCD Display Module for Raspberry Pi Pico, SPI — image 1
Hover to zoom

1 / 6 · Click to enlarge

WAVESHARE 65K Colors 160 x 80 Pixel 0.96 inch LCD Display Module for Raspberry Pi Pico, SPI

AI Summary
Board & Shield for everyday users

The WAVESHARE 65K Colors 160 x 80 Pixel 0.96 inch LCD Display Module for Raspberry Pi Pico, SPI is a mid-range board & shield designed for everyday users. It features One Package Weight: 0.03kgs / 0.06lb and One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch.

₹1,915
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,915
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.03kgs / 0.06lb
One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch
Best Sellers Rank (Consumer Electronics): #5120
Best Sellers Rank (Consumer Electronics > Electronics Module): #185
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #78

Ideal For

Everyday convenience
Share:
SKU: S-DIY0199Category: Board & Shield

About This Product

The WAVESHARE 65K Colors 160 x 80 Pixel 0.96 inch LCD Display Module for Raspberry Pi Pico, SPI is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.03kgs / 0.06lb
  • One Package Size: 15cm * 12cm * 2cm / 5.91inch * 4.72inch * 0.79inch
  • Best Sellers Rank (Consumer Electronics): #5120
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #185
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #78

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. 160x80 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect 2. SPI interface, requires minimal IO pins 3. 1x joystick and 2x user buttons for easy interacting 4. Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples) Specification 1. Operating voltage: 2.6 ~ 5.5V 2. Resolution: 160x80 pixels 3. Display color: 65K RGB 4. Communication interface: 4-wire SPI 5. Display panel: IPS 6. Display size: 21.70 x 10.80mm 7. Pixel size: 0.1356 x 0.135mm 8. Driver: ST7735S 9. Size: 52.00 x 25.00mm

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.