Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Waveshare 5MP OV5647 Optical Image Stabilization Camera Module for Raspberry Pi — image 1
Hover to zoom

1 / 7 · Click to enlarge

Waveshare 5MP OV5647 Optical Image Stabilization Camera Module for Raspberry Pi

AI Summary
Board & Shield for premium buyers

The Waveshare 5MP OV5647 Optical Image Stabilization Camera Module for Raspberry Pi is a premium board & shield designed for premium buyers. It features One Package Weight: 0.02kgs / 0.04lb and One Package Size: 8cm * 4cm * 1cm / 3.15inch * 1.57inch * 0.39inch.

₹6,893
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹6,893
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.02kgs / 0.04lb
One Package Size: 8cm * 4cm * 1cm / 3.15inch * 1.57inch * 0.39inch
Best Sellers Rank (Consumer Electronics): #3537
Best Sellers Rank (Consumer Electronics > Electronics Module): #112
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #39

Ideal For

Photography and videographySecurity monitoringLive streaming
Share:
SKU: S-DIY0582Category: Board & Shield

About This Product

The Waveshare 5MP OV5647 Optical Image Stabilization Camera Module for Raspberry Pi is a premium board & shield designed for premium buyers. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.02kgs / 0.04lb
  • One Package Size: 8cm * 4cm * 1cm / 3.15inch * 1.57inch * 0.39inch
  • Best Sellers Rank (Consumer Electronics): #3537
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #112
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #39

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is a MIPI_CSI camera with 5MP and 70 degree FOV. The onboard optical image stabilization camera module supports dual-axis image stabilization+/-5 degree compensation angle. Suitable for motion cameras, robots, wearables, and so on. Support Raspberry Pi, and Sunrise X3 Pi. Specifications: 1.Sensor :OV5647 2. CMOS Size: 1/4 inch 3. Pixel: 5MP 4. Aperture: F 2.8 5. Focal Length: 3.2mm 6. Angle of View: 70 degrees 7. Stabilization Type: OIS (Optical Image Stabilization) Stabilization 8. Focusing: Fixed focus 9. Distortion: Less than 1.0% 10. Range: XY axis +/- 5 derees 11. Image: 2592 x 1944 still image resolution 12. Video recording: 1920 x 1080p 30fps, 1280 x 720p 60fps, 640 ?? 480p 60fps, 640 x 480p 90fps

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.