Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Waveshare 2.8 inch Capacitive Touch Display for Raspberry Pi, 480 x 640, DSI, IPS, Fully Laminated Screen — image 1
Hover to zoom

1 / 5 · Click to enlarge

Waveshare 2.8 inch Capacitive Touch Display for Raspberry Pi, 480 x 640, DSI, IPS, Fully Laminated Screen

Phone Model
AI Summary
Board & Shield for everyday users

The Waveshare 2.8 inch Capacitive Touch Display for Raspberry Pi, 480 x 640, DSI, IPS, Fully Laminated Screen is a mid-range board & shield designed for everyday users. It features One Package Weight: 0.07kgs / 0.16lb and One Package Size: 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch.

₹4,913
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹4,913
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.07kgs / 0.16lb
One Package Size: 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch
Best Sellers Rank (Consumer Electronics): #3677
Best Sellers Rank (Consumer Electronics > Electronics Module): #128
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #50

Ideal For

Everyday convenience
Share:
SKU: S-DIY0286Category: Board & Shield

About This Product

The Waveshare 2.8 inch Capacitive Touch Display for Raspberry Pi, 480 x 640, DSI, IPS, Fully Laminated Screen is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.07kgs / 0.16lb
  • One Package Size: 15cm * 12cm * 3cm / 5.91inch * 4.72inch * 1.18inch
  • Best Sellers Rank (Consumer Electronics): #3677
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #128
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #50

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Features 1. 2.8-inch IPS capacitive touch screen with a hardware resolution of 480 x 640. 2. Capacitive 5-point touch control. 3. Tempered glass capacitive touch panel, hardness up to 6H. 4. Drive LCD directly through Raspberry Pi DSI interface with a refresh rate of up to 60Hz. 5. Working with Raspberry Pi, supports Raspberry Pi OS system. 6. Support Pi 4B/3B+/3A+, CM3+/4 must be used with an adapter board. 7. Backlight brightness control by the software. Package List 1. 2.8 inch DSI LCD x1 2. FPC 15PIN 1.0 pitch 50mm (opposite sides) x2

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.