Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Waveshare 0.91 inch OLED Display Module, 128x32 Pixels, I2C Interface — image 1
Hover to zoom

1 / 6 · Click to enlarge

Waveshare 0.91 inch OLED Display Module, 128x32 Pixels, I2C Interface

Phone Model
AI Summary
Board & Shield for everyday users

The Waveshare 0.91 inch OLED Display Module, 128x32 Pixels, I2C Interface is a mid-range board & shield designed for everyday users. It features One Package Weight: 0.02kgs / 0.04lb and One Package Size: 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch.

₹1,843
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,843
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.02kgs / 0.04lb
One Package Size: 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch
Best Sellers Rank (Consumer Electronics): #7675
Best Sellers Rank (Consumer Electronics > Electronics Module): #320
Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #178

Ideal For

Everyday convenience
Share:
SKU: S-ZY15797936Category: Board & Shield

About This Product

The Waveshare 0.91 inch OLED Display Module, 128x32 Pixels, I2C Interface is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.02kgs / 0.04lb
  • One Package Size: 6cm * 4cm * 2cm / 2.36inch * 1.57inch * 0.79inch
  • Best Sellers Rank (Consumer Electronics): #7675
  • Best Sellers Rank (Consumer Electronics > Electronics Module): #320
  • Best Sellers Rank (Consumer Electronics > Electronics Module > Modules Expansions Accessories): #178

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Overview This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Features 1. 0.91inch small form factor 2. 128x32 high resolution 3. I2C interface, requires only two signal pins 4. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications 1. Driver: SSD1306 2. Interface: I2C 3. Display color: White 4. Resolution: 128x32 5. Viewing angle: >160 degree 6. Operating voltage: 3.3V / 5V 7. Dimension: 36 x 12.5 (mm) Package Contents 1. 0.91inch OLED Module x1 3. PH2.0 4Pin x1

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.