Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Nextech USB-C to 4 Port USB-A Hub — image 1
Hover to zoom

1 / 2 · Click to enlarge

Nextech

Nextech USB-C to 4 Port USB-A Hub

35+ bought in past month
AI Summary
USB Interface Module for everyday users

The Nextech USB-C to 4 Port USB-A Hub by Nextech is a value-for-money usb interface module designed for everyday users. It features Model No. / Name: NH4 and USB: 1 × USB 3.0, 3 × USB 2.0.

USB rechargeable
₹1,099
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,099
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: NH4
USB: 1 × USB 3.0, 3 × USB 2.0
Data Transfer Rate: Up to 5Gbps
Compatibility: Windows, macOS, Android devices
Connector Type: USB-C input
Output Port: USB-A

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-3321204Category: USB Interface Module

About This Product

The Nextech USB-C to 4 Port USB-A Hub by Nextech is a value-for-money usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: NH4
  • USB: 1 × USB 3.0, 3 × USB 2.0
  • Data Transfer Rate: Up to 5Gbps
  • Compatibility: Windows, macOS, Android devices
  • Connector Type: USB-C input — compatible with modern devices
  • Output Port: USB-A — compatible with modern devices
  • Port Type: USB 3.0 / USB 2.0 — compatible with modern devices
  • Sensor Type: Strain Gauge Based Load Cell

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Nextech NH4 4-in-1 USB-C to USB-A Hub is a compact and practical solution for expanding the connectivity of your USB-C devices. It features one high-speed USB 3.0 port and three USB 2.0 ports, allowing you to connect multiple peripherals simultaneously.

USB-C to USB-A Hub plug-and-play hub requires no drivers or additional software, making it convenient for everyday use. Designed with durability and portability in mind, the hub is lightweight and ideal for travel or workspace setups.

It supports a wide range of devices such as keyboards, mice, flash drives, printers, and external storage, making it a reliable accessory for laptops, tablets, and computers.


Features:

  1. 4-in-1 USB-C hub with one USB 3.0 and three USB 2.0 ports
  2. High-speed USB 3.0 port supports data transfer up to 5Gbps
  3. USB 2.0 ports support data transfer speeds up to 480Mbps
  4. Plug-and-play design with no drivers required
  5. Lightweight and compact for easy portability
  6. Durable construction with heat-resistant connectors
  7. Allows simultaneous connection of multiple USB devices

Package Includes:

1 x Nextech 4-in-1 USB-C to USB-A Hub Card Reader Hub

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.