Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
T20 1080P Full HD 4G (EU Version) Solar Powered Camera, Support PIR Human Body Infrared Sensor, Night Vision, Two Way Audio, TF Card — image 1
Hover to zoom

1 / 12 · Click to enlarge

T20 1080P Full HD 4G (EU Version) Solar Powered Camera, Support PIR Human Body Infrared Sensor, Night Vision, Two Way Audio, TF Card

5.05 ratings
Phone Model
4G (EU Version)
WiFi4G (US Version)
AI Summary
Wifi IP Cameras for premium buyers

The T20 1080P Full HD 4G (EU Version) Solar Powered Camera, Support PIR Human Body Infrared Sensor, Night Vision, Two Way Audio, TF Card is a premium wifi ip cameras designed for premium buyers. It features Model: T20 and Memory: TF Card , up to 128GB (not included). Customers praise its great value for money. 100% of buyers rate it 4★ or above.

great value for money
₹10,585
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹10,585
Buying tip: A top-tier option — the best features and quality available in this category.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model: T20
Memory: TF Card , up to 128GB (not included)
Sensor Size: 1/2.7 inch Progressive Scan
Lens: 2.8mm
Video Compression Format: H.265
Resolution: 1920*1080

Ideal For

Photography and videographySecurity monitoringLive streaming
Share:
SKU: S-BM1011Category: Wifi IP Cameras

About This Product

The T20 1080P Full HD 4G (EU Version) Solar Powered Camera, Support PIR Human Body Infrared Sensor, Night Vision, Two Way Audio, TF Card is a premium wifi ip cameras designed for premium buyers. Customers highlight its great value for money.

Key Specifications

  • Model: T20
  • Memory: TF Card , up to 128GB (not included) — effortless multitasking
  • Sensor Size: 1/2.7 inch Progressive Scan
  • Lens: 2.8mm
  • Video Compression Format: H.265
  • Resolution: 1920*1080
  • Infrared Distance: 20m
  • Operate Temperature: -30 to 60 Degree Celsius

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: great value for money.

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. Using high-performance ISP and 1/2.7-inch black light image sensor 2. 1920x1080P HD video 3. Built-in large capacity battery 4. Ultra-low power consumption standby, fast wake-up in 0.2 seconds 5. PIR human body induction 6. Built-in microphone and speaker, support two-way voice intercom 7. Support cloud storage + local storage 8. APP supports Android/iOS 9. Outdoor waterproof 10. Support integrated installation or split installation 11. Alarm mode: PIR human body infrared sensor, detection distance 0-12 meters, detection angle 105 degrees 12. Storage mode: cloud storage and local storage 13. Power supply mode: solar panel + built-in battery 14. Solar battery power: 3.8W 15. Battery capacity: built-in 14400mAh 16. Working power: 3W 17. Networking method: LTE:B1/B3/B5/B7/B8/B20/B38/B40/B41; WCDMA:B1/B5/B8; GSM:900/1800

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.