Saramonic UwMic9S Kit1 Broadcast Interview UHF Dual Channels Wireless Lavalier Microphone System

1. The wireless microphone system provides high-quality 2-person wireless audio solutions for radio and television, ENG, filmmakers, video bloggers, mobile journalists and content creators 2. It is an easy-to-use, high-quality and flexible UHF system. The external input allows the receiver to be connected to a microphone or line level equipment, such as a shotgun microphone, mixer, recorder or music player to capture additional sound Or music 3. The system can be powered by its USB-C port, allowing it to run on a USB-C 5V power bank for several hours 4. UwMic9s RX is a dual-channel UHF wireless receiver that can be installed on the camera. It has wide switching RF bandwidth, high-contrast OLED display and synchronization between infrared, transmitter and receiver. Two detachable antennas can be rotated 360 degrees for better reception, and the output of the receiver can be switched between mono and stereo modes 5. UwMic9S-TX9S is an installable bodypack transmitter. It has an easy-to-read OLED display, a detachable antenna and a built-in rechargeable battery. Through the line input and microphone input jacks, it can accept audio from the attached 3.5mm locking lavalier microphone or other line-level equipment. Short press the power button to mute the microphone between shots. The lock function prevents the transmitter from being accidentally muted or turned off 6. Adopt high-definition audio processing technology 7. 96 transmission channels, 100 meters barrier-free transmission distance 8. Built-in 2000 mAh lithium battery, up to 8 hours of battery life 9. Chinese/English function operation menu, support multi-language upgrade 10. Mono/stereo switching, support microphone/line input 11. Dual channel diversity reception, support A/B channel independent control 12. With low-cut function, can reduce low-frequency noise; one-key mute function 13. With earphone monitoring function 14. The receiver expands the microphone/line input interface to achieve three-person recording 15. Material: aluminum alloy 16. Number of channels: 96 17. Audio output level: -60 dBV 18. Headphone output level: 30mW 19. Receiving frequency: 514MHz-596MHz 20. Receiving sensitivity: -95dBm 21. Signal-to-noise ratio: 75dB or more 22. Reference deviation: +/-5kHz (-60 dBV, 1kHz input) 23. Frequency response: 40Hz-18kHz (+/-3dB) 24. Dimensions: 220x64x25mm 25. Weight: 193g