Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Renke SHT-77, Temperature Sensor Probe For (SHT20), 77mm Length — image 1
Hover to zoom

1 / 3 · Click to enlarge

Renke

Renke SHT-77, Temperature Sensor Probe For (SHT20), 77mm Length

24+ bought in past month
AI Summary
Temperature Sensor Probes for everyday users

The Renke SHT-77, Temperature Sensor Probe For (SHT20), 77mm Length by Renke is a mid-range temperature sensor probes designed for everyday users. It features Shipping Weight: 0.108 kg and Shipping Dimensions: 15 × 14 × 4 cm.

₹1,799
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,799
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.108 kg
Shipping Dimensions: 15 × 14 × 4 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-3383335Category: Temperature Sensor Probes

About This Product

The Renke SHT-77, Temperature Sensor Probe For (SHT20), 77mm Length by Renke is a mid-range temperature sensor probes designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.108 kg
  • Shipping Dimensions: 15 × 14 × 4 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Renke SHT-77 is a 77mm Measured Parameters Temperature & Humidity built using the Sensirion SHT20 digital sensor IC. It offers slightly deeper insertion capability compared to standard probes, making it suitable for applications requiring extended reach into ducts or equipment.

The probe provides factory-calibrated I²C digital output for accurate temperature monitoring. It is designed for industrial automation, HVAC systems, and environmental monitoring where reliable long-term performance and stable readings are essential.


Features:

  1. SHT20 based digital temperature sensing
  2. Extended 77mm probe length
  3. Factory calibrated output
  4. I²C interface
  5. Low power design
  6. High stability sensing
  7. Industrial grade reliability
  8. Easy controller integration

Specifications:

  1. Sensor IC: SHT20
  2. Interface: I²C
  3. Voltage: 2.1–3.6 V
  4. Range: -40°C to +125°C
  5. Accuracy: ±0.3°C
  6. Resolution: 14-bit
  7. Response time: 5–30 sec
  8. Probe Length: 77 mm
  9. Output: Digital calibrated signal
  10. Housing: PE body
  11. Measured Parameters: Temperature & Humidity

Package Includes:

1 x Renke SHT-77, Temperature Sensor Probe For (SHT20), 77mm Length

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.