Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
PT15GV24-474A2020 Amphenol Piher Sensors and Controls Potentiometer — image 1
Hover to zoom
Amphenol

PT15GV24-474A2020 Amphenol Piher Sensors and Controls Potentiometer

36+ bought in past month
AI Summary
Trimmer Potentiometers for everyday users

The PT15GV24-474A2020 Amphenol Piher Sensors and Controls Potentiometer by Amphenol is a value-for-money trimmer potentiometers designed for everyday users. It features Power Dissipation (mW): 250 and Mounting Type: Through Hole.

₹564
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹564
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Power Dissipation (mW): 250
Mounting Type: Through Hole
Power Rating: 250mW
Resistance (Ohm): 470k
Tolerance (%): 20
Voltage Rating (V): 250VDC

Ideal For

Everyday convenience
Share:
SKU: robu-1159654Category: Trimmer Potentiometers

About This Product

The PT15GV24-474A2020 Amphenol Piher Sensors and Controls Potentiometer by Amphenol is a value-for-money trimmer potentiometers designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Power Dissipation (mW): 250
  • Mounting Type: Through Hole
  • Power Rating: 250mW
  • Resistance (Ohm): 470k
  • Tolerance (%): 20
  • Voltage Rating (V): 250VDC — works with standard household power
  • No. of Turns: 1
  • Operating Temperature (°C): -25 to 70

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The PT15GV24-474A2020 Amphenol Sensors and Controls Switch  potentiometers offer control where frequent adjustment is required. The shaftless design allows for the employment of different engagement mechanisms, such as a customized shaft, motor control, or a human interface adjustment. This PT15GV24-474A2020 Amphenol can also control variable outputs including frequency, change in motor speed, or volume.
Applications:
  1. Appliance program selection
  2. Thermostat adjustment
  3. Timer and control relays
  4. Consumer electronics
  5. Power tool controls
  6. Test and measurement equipment

Features:

  1. Excellent performance (up to 3% linearity)
  2. Carbon or cermet resistive element
  3. Up to 38 mechanical detents for tactile feedback
  4. Up to 100.000 life cycles
  5. IP54 protection
  6. Magazine packaging for automatic insertion available
  7. Polyester / Alumina substrate
  8. Wiper positioned at initial, 50% or fully clockwise
  9. Loose and assembled shaft and knobs
  10. Linear, logarithmic and antilogarithmic tapers
  11. Self extinguishable plastic (UL 94V-0) available
  12. SPDT switch and low torque version available

Package Includes:

1 x PT15GV24-474A2020 - Amphenol Piher Sensors and Controls Switch

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.