Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Original Xiaomi Smart Wall Socket Pro Smart Linkage 20W Fast Charging Works with Mijia APP(Dark Grey) — image 1
Hover to zoom

1 / 7 · Click to enlarge

Original Xiaomi Smart Wall Socket Pro Smart Linkage 20W Fast Charging Works with Mijia APP(Dark Grey)

Phone Model
XMZNCZ01LM
ZNCZ01ZMQBZ11LM
AI Summary
Smart Module for everyday users

The Original Xiaomi Smart Wall Socket Pro Smart Linkage 20W Fast Charging Works with Mijia APP(Dark Grey) is a mid-range smart module designed for everyday users. It features One Package Weight: 0.16kgs / 0.35lb and One Package Size: 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch.

fast charging
₹4,078
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹4,078
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.16kgs / 0.35lb
One Package Size: 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch
Best Sellers Rank (Consumer Electronics): #1540
Best Sellers Rank (Consumer Electronics > Smart Home): #257
Best Sellers Rank (Consumer Electronics > Smart Home > Smart Socket): #2

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-EDA006032301ACategory: Smart Module

About This Product

The Original Xiaomi Smart Wall Socket Pro Smart Linkage 20W Fast Charging Works with Mijia APP(Dark Grey) is a mid-range smart module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • One Package Weight: 0.16kgs / 0.35lb
  • One Package Size: 10cm * 10cm * 5cm / 3.94inch * 3.94inch * 1.97inch
  • Best Sellers Rank (Consumer Electronics): #1540
  • Best Sellers Rank (Consumer Electronics > Smart Home): #257
  • Best Sellers Rank (Consumer Electronics > Smart Home > Smart Socket): #2

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. Intelligent socket, integrating remote control, timing control, and Xiaoai voice control 2. USB-A, Type-C charging port, dual protocol 20W fast charging 3. AG glass panel, AF coating, anti-oil, anti-fingerprint, anti-scratch 4. Optimum materials, overload protection, one-button power-off and other safety designs 5. Combined with Bluetooth Mesh gateway and other smart home devices, intelligent linkage can be achieved Parameter Product size: 86x86x46.25mm Wireless connection: Low power Bluetooth (Mesh) Technical parameters: 10A, 250V~ USB rated input: 220-250V~, 50/60Hz, 0.28A MAX USB module output: USB-A (single port): 5V-3A, 9V=2.22A, 12V=1.67A USB module output: Type-C (single port): 5V-3A, 9V-2.22A, 12V=1.67A Total output power of USB module: 20W MAX (5V) Working temperature: -10 to 40 degrees Celsius Working humidity: 0%~95% RH, non condensing

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.