Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Original Xiaomi Multimode Smart Home Gateway 2 WiFi BT ZigBee RJ45 Connect(White) — image 1
Hover to zoom

1 / 10 · Click to enlarge

Original Xiaomi Multimode Smart Home Gateway 2 WiFi BT ZigBee RJ45 Connect(White)

5.011 ratings
Phone Model
AI Summary
Smart Module for everyday users

The Original Xiaomi Multimode Smart Home Gateway 2 WiFi BT ZigBee RJ45 Connect(White) is a premium smart module designed for everyday users. It features One Package Weight: 0.21kgs / 0.46lb and One Package Size: 9.5cm * 9.5cm * 5.5cm / 3.74inch * 3.74inch * 2.17inch. Customers praise its easy to set up and use and accurate and reliable. 100% of buyers rate it 4★ or above.

easy to set up and useaccurate and reliable
₹5,528
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹5,528
Buying tip: A quality investment for dependable performance and premium build quality.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

One Package Weight: 0.21kgs / 0.46lb
One Package Size: 9.5cm * 9.5cm * 5.5cm / 3.74inch * 3.74inch * 2.17inch
Best Sellers Rank (Consumer Electronics): #1927
Best Sellers Rank (Consumer Electronics > Smart Home): #363
Best Sellers Rank (Consumer Electronics > Smart Home > Smart Switch): #21

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: S-CA1001Category: Smart Module

About This Product

The Original Xiaomi Multimode Smart Home Gateway 2 WiFi BT ZigBee RJ45 Connect(White) is a premium smart module designed for everyday users. Customers highlight its easy to set up and use and accurate and reliable.

Key Specifications

  • One Package Weight: 0.21kgs / 0.46lb
  • One Package Size: 9.5cm * 9.5cm * 5.5cm / 3.74inch * 3.74inch * 2.17inch
  • Best Sellers Rank (Consumer Electronics): #1927
  • Best Sellers Rank (Consumer Electronics > Smart Home): #363
  • Best Sellers Rank (Consumer Electronics > Smart Home > Smart Switch): #21

Customer Verdict

100% of buyers rated this product 4 stars or above. The most appreciated qualities are: easy to set up and use, accurate and reliable.

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. 2.4/5.0G dual band WiFi, stable connection 2. 128MB large memory, 1G dual core processor, fast response 3. Support Zigbee, Bluetooth and Bluetooth Mesh communication protocols to achieve interconnection of multiple devices 4. Support the direct connection of RJ45 cable network port, with stable and efficient transmission 5. Intelligent linkage with home devices, voice, remote and automatic control 6. CMIIT ID: 2022AP5586 7. Input: 5V 1A 8. Operating humidity: 0-95% RH, no condensation 9. Network port: 10/100Mbps Ethernet 10. Support system: Android 5.0 or iOS 12.0 and above 11. Wireless connection: WiFi IEEE 802.11 a/b/g/n, 2.4GHz/5GHz, Zigbee 3.0 IEEE802.15.4, low-power Bluetooth 12. Product size: 95x95x26mm 13. Packing list: - Smart Gateway 2 x 1 - Power adapter x 1 - Power cable x 1 - User manual x 1

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.