Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Nextech 5-in-2 USB-C & USB 3.0 Card Reader Hub — image 1
Hover to zoom

1 / 2 · Click to enlarge

Nextech

Nextech 5-in-2 USB-C & USB 3.0 Card Reader Hub

25+ bought in past month
AI Summary
USB Interface Module for everyday users

The Nextech 5-in-2 USB-C & USB 3.0 Card Reader Hub by Nextech is a mid-range usb interface module designed for everyday users. It features Item Type: Card Reader Hub and Model No. / Name: NH5.

USB rechargeable
₹1,539
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,539
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Item Type: Card Reader Hub
Model No. / Name: NH5
Interface Type: USB-A + USB-C
USB Standard: USB 3.0 / USB 2.0
Connectivity: USB-A and USB-C dual plug
Data Transfer Rate: Up to 5Gbps (USB 3.0)

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-3321182Category: USB Interface Module

About This Product

The Nextech 5-in-2 USB-C & USB 3.0 Card Reader Hub by Nextech is a mid-range usb interface module designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Item Type: Card Reader Hub
  • Model No. / Name: NH5
  • Interface Type: USB-A + USB-C — compatible with modern devices
  • USB Standard: USB 3.0 / USB 2.0
  • Connectivity: USB-A and USB-C dual plug
  • Data Transfer Rate: Up to 5Gbps (USB 3.0)
  • Port: 1 × USB 3.0, 2 × USB 2.0 — compatible with modern devices
  • Sensor Type: Strain Gauge Based Load Cell

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The Nextech NH5 USB-A + USB-C 5 Port Hub & it is a versatile connectivity solution designed to expand the functionality of laptops, tablets, and smartphones.

Featuring USB-A and Type-C plugs, it offers wide compatibility with modern devices including PCs, MacBooks, and mobile devices. The hub provides one USB 3.0 port, two USB 2.0 ports, and dedicated SD and Micro SD card reader slots for easy file transfers.

With plug-and-play functionality, it requires no drivers or additional software. Compact and lightweight, the Nextech NH5 is perfect for professionals, photographers, and everyday users who need reliable multi-device connectivity.


Features:

  1. 5-port hub with USB and card reader expansion
  2. 1 × USB 3.0 port with up to 5Gbps transfer speed
  3. 2 × USB 2.0 ports for peripheral connectivity
  4. Built-in SD and Micro SD card reader slots
  5. Dual connectors: USB-A and USB-C for wider compatibility
  6. Plug-and-play design with no driver installation required
  7. Ideal for keyboards, flash drives, printers, and cameras
  8. Compact, lightweight, and travel-friendly design

Package Includes:

1 x Nextech 5-in-2 USB-C & USB 3.0 Card Reader Hub

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.