Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
Landa Tianrui LDTR - ZD001 Improve Controller Board Nano V3.0 ATmega328P USB Flash Driver for Arduino — image 1
Hover to zoom

1 / 7 · Click to enlarge

Landa Tianrui LDTR - ZD001 Improve Controller Board Nano V3.0 ATmega328P USB Flash Driver for Arduino

5.02 ratings
AI Summary
Board & Shield for everyday users

The Landa Tianrui LDTR - ZD001 Improve Controller Board Nano V3.0 ATmega328P USB Flash Driver for Arduino is a mid-range board & shield designed for everyday users. It features Types: Controller Board and Size: 6.0*3.0*3.0 cm.

₹1,623
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,623
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Types: Controller Board
Size: 6.0*3.0*3.0 cm
Weight: 80 g
One Package Weight: 0.05kgs / 0.11lb
One Package Size: 6cm * 3cm * 3cm / 2.36inch * 1.18inch * 1.18inch
Best Sellers Rank (Consumer Electronics): #1221

Ideal For

Everyday convenience
Share:
SKU: S-DIY4047Category: Board & Shield

About This Product

The Landa Tianrui LDTR - ZD001 Improve Controller Board Nano V3.0 ATmega328P USB Flash Driver for Arduino is a mid-range board & shield designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Types: Controller Board
  • Size: 6.0*3.0*3.0 cm
  • Weight: 80 g
  • One Package Weight: 0.05kgs / 0.11lb
  • One Package Size: 6cm * 3cm * 3cm / 2.36inch * 1.18inch * 1.18inch
  • Best Sellers Rank (Consumer Electronics): #1221
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #36
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Boards & Shields): #9

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Main Features: 1. Use the popular mini USB interface. 2. The download speed is more fast. 3. Use ATMEGA328P-AU chip and 49s crystal oscillator. 4. Main Chip: ATmega328P-AU 5. Mainly Compatible with: Ardunio

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.