Hover to zoom
1 / 4 · Click to enlarge
HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal）
26+ bought in past month
AI Summary
Battery Charger Module for everyday usersThe HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal） is a value-for-money battery charger module designed for everyday users. It features Output Voltage: 12 and Output Current (A): 3.
₹1,109
Free Shipping💵 COD Available
Available Offers
Free Delivery on this order. No minimum order value.
15-Day Easy Returns — hassle-free return & full refund.
Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.
Total: ₹1,109
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug – 7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only
Available Offers
💳
5% Cashback
Pay with UPI & get 5% cashback (up to ₹50) via Razorpay
🏦
No-Cost EMI
Available on select bank cards at checkout. 0% interest for 3 months.
📦
Free Shipping
Free delivery on all orders. No minimum order value.
💵
Cash on Delivery
COD available on orders up to ₹5,000 across India.
Quick Specs
Output Voltage: 12
Output Current (A): 3
Power Supply Voltage (V): 15-28VDC(Recommended 16-25VDC)
Additional Specs.: Over Charge Voltage: 14.8V Float Charge Voltage: 13.55V
Max Current Continuous (A): 3A
Quiescent Current: 1.8mA
Ideal For
Charging smartphones and tabletsPowering accessoriesTravel use
SKU: robu-1121313Category: Battery Charger Module
About This Product
The HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, （With Terminal） is a value-for-money battery charger module designed for everyday users. It delivers reliable performance at an accessible price.
Key Specifications
- Output Voltage: 12 — works with standard household power
- Output Current (A): 3
- Power Supply Voltage (V): 15-28VDC(Recommended 16-25VDC) — works with standard household power
- Additional Specs.: Over Charge Voltage: 14.8V Float Charge Voltage: 13.55V — works with standard household power
- Max Current Continuous (A): 3A
- Quiescent Current: 1.8mA
- Switching frequency: 300kHz — smooth, flicker-free operation
- Operating Temperature (°C): -40°C to +85°C
Why Buy from Elecvora?
Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.
This is HOT DD30CRTA Lead Acid Battery Charger 12V Charging Device 3A.
The DD30CRTA is a PWM switch-mode battery charger controller for a 12V lead-acid battery in a small package using a few external components. The DD30CRTA is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode. In over-charge and float charge mode, the regulation voltage is internally set.
The constant charge current is programmable with a single sense resistor.
Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed constant charge current until the cell voltage exceeds 75% of the regulation voltage in over-charge mode. The over-charge is terminated once the charging current drops to 38% of the constant charge current, then DD30CRTA will enter float charge mode. A new charge cycle automatically restarts if the battery voltage falls below 83.95% of the over-charge voltage in float-charge mode. DD30CRTA will automatically enter sleep mode when the input voltage is lower than the battery voltage.
Other features include under-voltage lockout and indication, etc.
1: The Regulation Voltage in Over Voltage Mode and Float Charge Mode
The regulation voltage VOC at BAT pin in overcharge mode is set at 14.8V(Typical) with ±1.5% accuracy.
In float charge mode, the regulation voltage VFLOAT at BAT pin is 91.57% of that in overcharge mode, which is 13.55V(Typical).
Trickle Charge Mode At the beginning of a charge cycle, if the battery voltage is below 75%×VOC, the charger goes into trickle
charge mode with the charge current set at about 17.5% of the constant current.
2: End-of-Over Charge Current
When the battery voltage approaches the over-charge voltage, the charger goes into the overcharge mode. In
overcharge mode, the charge current start to decrease and when the charge current drops to 38% of constant
charge current, the charger goes into float-charge mode.
3: Float Charge Mode
After the overvoltage charge is terminated, the charger goes into float charge mode. In float charge mode, the
battery voltage is regulated to 91.57%×VOC, namely 13.55V(Typical). Float charge mode can compensate for
the loss of battery power due to self-discharge or external loading.
4: Automatic Battery Recharge
In float mode, if both the battery and the input power supply (wall adapter) are present, a new charge cycle will
begin if the battery voltage drops below 83.95%×VOC due to self-discharge or external loading.
A new charge cycle can also be started manually by plugging off the input supply and reapplying it.
Application:
- Car battery charging
- Solar battery charging
- Loudspeaker
- Lead-Acid Battery Charger
- Electric Bicycle Charger
- UPS
- Portable Industrial and Medical Equipment
- Standalone Battery Chargers
Features:
- Fixed Over-Charge Voltage
- Overcurrent protection
- Automatic Conditioning of Deeply Discharged Batteries
- Automatic Recharge
- Charger Indication
- Battery Overvoltage Protection
- Suitable for 1-10000AH 12V Lead-Acid Battery charger
Package Includes:
1 x HOT DD30CRTA Lead Acid Battery Charger 12V Charging Device 3ASetup Guide
1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.
