ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional — image 1

Hover to zoom

1 / 11 · Click to enlarge

ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional

Name: ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional
Brand: Elecvora
SKU: 2051600
Price: 2283 INR
Availability: InStock

29+ bought in past month

AI Summary

Motherboard & Development Board for everyday users

The ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional is a mid-range motherboard & development board designed for everyday users.

₹2,283-34%

MRP:₹3,477Save ₹1,194

Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

34% Off — you save ₹1,194 on this product!

Type: ESP32-P4-ETH

Price: ₹2,283

Quantity

Total: ₹2,283

Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.

Estimated delivery: 30 Aug – 13 Sept

Check delivery date

Free Shipping

Pan India delivery

15-Day Returns

Hassle-free policy

Secure Payment

Razorpay protected

Quality Assured

Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Ideal For

Everyday convenience

SKU: bg-2051600Category: Motherboard & Development Board

About This Product

The ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional is a mid-range motherboard & development board designed for everyday users. It delivers reliable performance at an accessible price.

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

Specifications:

MCU: ESP32-P4 with RISC-V 32-bit dual-core and single-core processors

On-chip memory: 128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP SRAM, 8KB TCM

External memory: 32MB PSRAM (in package), 32MB NOR Flash (external)

Networking: RJ45 100Mbps Ethernet; supports connection to PoE module

Interfaces: MIPI-CSI (2-lane, with ISP), MIPI-DSI (2-lane), USB 2.0 OTG HS, SDIO 3.0 SD card slot, SPI, I2S, I2C, LED PWM, MCPWM, RMT, ADC, UART, TWAI

Audio: microphone and speaker terminals; audio playback and audio capture

Codecs/accelerators: JPEG decoder, H.264 encoder/decoder, Pixel Processing Accelerator (PPA), Image Signal Processor (ISP)

Expansion: 40-pin GPIO expansion; 2x20 headers; 27 programmable GPIO

Security: secure boot, flash encryption, hardware crypto engine, TRNG, hardware access protection (APM), privilege separation; digital signature and secure key management

Compatibility: supports XiaoZhi AI voice interaction

Features:

RISC‑V 32‑bit dual‑core + single‑core architecture for high‑performance multimedia.

32MB PSRAM and 32MB NOR Flash with rich on‑chip memory for smooth development.

MIPI‑CSI/DSI (2‑lane), USB 2.0 OTG HS, and RJ45 100M Ethernet for wide connectivity.

Built‑in JPEG/H.264 codecs, ISP and PPA for image and voice processing.

Secure boot, flash encryption, TRNG, and access protection; works with XiaoZhi AI voice.

Package included:

1 x ESP32-P4 Development Board Kit

(the POE is optional)

Product Safety Information

Setup Guide

Identify the pins

Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.

Wire to your microcontroller

Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.

Install libraries

In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.

Upload example sketch

Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.

Calibrate if needed

Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.

Browse Motherboard & Development Board Electronics

ESP32-P4-ETH Development Board Kit RJ45 Ethernet Port 32MB NOR Flash DSI USB 2.0 OTG HS RISC-V MCU XiaoZhi AI Voice PoE Module Optional

About This Product

Why Buy from Elecvora?

Setup Guide

Related Products

5Pcs Geekcreit® NodeMcu Lua WIFI Internet Things Development Board Based ESP8266 CP2102 Wireless Module

LILYGO T-Watch Ultra Watch ESP32-S3 Development Board 2.06 Inch AMOLED 410x502 Capacitive Touch Wi-Fi BLE 5.0 LoRa SX1262 16MB Flash 8MB PSRAM NFC GNSS Programmable Watch

LuckFox Pico Camera SC3336 3MP Camera Module (B) High Sensitivity Low Light Performance Compatible LuckFox Pico Series Board

5Pcs Geekcreit® 12V 4CH Channel 433Mhz Wireless Remote Control Switch With 2 Tr

LILYGO T-Watch S3 Plus Smartwatch ESP32-S3 16MB Flash 8MB PS RAM Wi-Fi BLE LoRa 1.54-inch IPS LCD Programming Watch

Original Xiaomi Mijia 5 in 1 Smart Home Security Kit, Including Outlet(Zigbee Version) & Wireless Switch & Human Body Sensor & Gateway Remote Control & Window Door Sensor