Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
DFRobot Fermion BNO055 Intelligent 9-Axis Sensor Breakout — image 1
Hover to zoom

1 / 4 · Click to enlarge

DFRobot

DFRobot Fermion BNO055 Intelligent 9-Axis Sensor Breakout

28+ bought in past month
AI Summary
DF Robot Modules for everyday users

The DFRobot Fermion BNO055 Intelligent 9-Axis Sensor Breakout by DFRobot is a mid-range df robot modules designed for everyday users. It features Operating Voltage: 3.3V - 5.5V and I2C Address: Default 0x28.

₹2,396
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,396
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Operating Voltage: 3.3V - 5.5V
I2C Address: Default 0x28
Accelerometer Type: Range ±2g, ±4g, ±8g, ±16g
Gyroscope: Range ±125°/s to ±2000°/s
Shipping Weight: 0.02 kg
Shipping Dimensions: 7 × 6 × 3 cm

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-2257132Category: DF Robot Modules

About This Product

The DFRobot Fermion BNO055 Intelligent 9-Axis Sensor Breakout by DFRobot is a mid-range df robot modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Operating Voltage: 3.3V - 5.5V — works with standard household power
  • I2C Address: Default 0x28
  • Accelerometer Type: Range ±2g, ±4g, ±8g, ±16g — plenty of room for files, apps, and media
  • Gyroscope: Range ±125°/s to ±2000°/s — reliable connection even at a distance
  • Shipping Weight: 0.02 kg
  • Shipping Dimensions: 7 × 6 × 3 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

BNO055 Intelligent 9-axis Sensor is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic sensor, and a 32-bit microcontroller. With a size of 5.2 x 3.8 x 1.1mm, the BNO055 is significantly smaller than comparable discrete or system-on-board solutions and also is the sensor-hub product of the smallest size that supports Windows 8.1 at present. BNO055 Intelligent 9-axis Sensor is able to provide not only single data of the three kinds of sensors (accelerometer/gyroscope/geomagnetic), but also integrated data, such as quaternions, Euler angles, or vectors. Besides, the built-in MCU frees the users from the complexities of algorithm processing, which provides application support in many aspects for smartphones, wearable devices, and so on.


Features:

  1. High Accuracy: Provides precise measurements across multiple axes.
  2. I2C Communication: Compatible with 3.3V to 5V systems.
  3. Low Power Consumption: Suitable for battery-operated devices.
  4. Integrated Data Outputs: Offers quaternions, Euler angles, and vectors directly.

Package include:

1 x DFRobot Fermion: BNO055 Intelligent 9-axis Sensor (Breakout)

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.