Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
DC-DC Step Down Converter Module  DC7-38V to DC5V 6A Max — image 1
Hover to zoom

1 / 2 · Click to enlarge

DC-DC Step Down Converter Module DC7-38V to DC5V 6A Max

32+ bought in past month
AI Summary
Buck Converter for everyday users

The DC-DC Step Down Converter Module DC7-38V to DC5V 6A Max is a value-for-money buck converter designed for everyday users. It features Shipping Weight: 0.030 kg and Shipping Dimensions: 8 × 5 × 3 cm.

₹909
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹909
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Shipping Weight: 0.030 kg
Shipping Dimensions: 8 × 5 × 3 cm

Ideal For

Everyday convenience
Share:
SKU: robu-3422023Category: Buck Converter

About This Product

The DC-DC Step Down Converter Module DC7-38V to DC5V 6A Max is a value-for-money buck converter designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Shipping Weight: 0.030 kg
  • Shipping Dimensions: 8 × 5 × 3 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

The DC-DC Step Down Converter Module (7-38V to 5V 6A) is a high-efficiency power solution designed for stable voltage regulation in demanding electronic applications. It efficiently converts a wide input voltage range into a constant 5V output, making it ideal for powering microcontrollers, sensors, and other 5V devices. With up to 95% efficiency and a built-in passive heatsink, the module ensures reliable performance even under high load conditions.

It supports continuous current up to 5A and can reach 6A with proper cooling. Equipped with multiple protection features like reverse polarity, short circuit, and thermal limiting, this compact converter is perfect for DIY electronics, battery-powered systems, and embedded applications.


Features:

  1. Wide input voltage range from 7V to 38V DC
  2. Stable 5V regulated output
  3. High efficiency up to 95%
  4. Supports up to 5A continuous current
  5. Up to 6A output with proper cooling
  6. Built-in passive heatsink for thermal control
  7. Multiple protection functions for safety
  8. Low interference operation at 210 kHz

Specifications:

  1. Input Voltage: 7V – 38V DC
  2. Output Voltage: 5V DC
  3. Output Current (Continuous): Up to 5A
  4. Output Current (Max): Up to 6A (with cooling)
  5. Output Power: Up to 30W
  6. Efficiency: Up to 95%
  7. Operating Frequency: 210 kHz
  8. Idle Current Consumption: ~1 mA
  9. Operating Temperature Range: -40°C to +85°C
  10. Dimensions: 60 × 30 × 14 mm
  11. Weight: 24 g 

Package Includes:

1 x DC-DC Step Down Converter Module  DC7-38V to DC5V 6A Max

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.