Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port — image 1
Hover to zoom

1 / 3 · Click to enlarge

CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port

32+ bought in past month
AI Summary
xBee Zigbee modules for everyday users

The CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port is a value-for-money xbee zigbee modules designed for everyday users. It features Model No. / Name: Zigbee Board/Module and CPU: 8051.

wireless convenience
₹1,121
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,121
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Zigbee Board/Module
CPU: 8051
Frequency (GHz): 2.3 to 2.5
Antenna Type: External
GPIO: 21
Operating Temperature (°C): -40 ~ +125

Ideal For

Electronics projectsArduino / Raspberry Pi buildsPrototyping
Share:
SKU: robu-868044Category: xBee Zigbee modules

About This Product

The CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port is a value-for-money xbee zigbee modules designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Zigbee Board/Module
  • CPU: 8051 — smooth, lag-free performance
  • Frequency (GHz): 2.3 to 2.5 — smooth, flicker-free operation
  • Antenna Type: External
  • GPIO: 21
  • Operating Temperature (°C): -40 ~ +125
  • Length (mm): 50
  • Width (mm): 30

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This is a CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port, which supports Zigbee Protocol. The Module has a 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver, with Excellent Receiver Sensitivity and Robustness to Interference this module has programmable output power up to 4.5 dBm. Made with very few external components, this module supports 2.4-GHz IEEE 802.15.4 systems. The pin configuration is given below:
 Pin Number/Name  Pin Name
P03 TX
P02 RX
VCC 3.3V
GND GND
 P21 Debug Data
P22 Debug Clock
RST Reset
 

Useful link:

To flash this module, Follow the instructions given on this link .
Applications:
  1. Home/Building Automation.
  2. Lighting Systems.
  3. Industrial Control and Monitoring.
  4. Low-Power Wireless Sensor Networks.
  5. Consumer Electronics.
  6. Health Care.

Features:

  1. 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver.
  2. Excellent Receiver Sensitivity and Robustness to Interference.
  3. Programmable Output Power Up to 4.5 dBm.
  4. Very Few External Components
  5. 2.4-GHz IEEE 802.15.4 Systems.

Package Includes:

1 x CC2530 Zigbee Module UART Wireless Core Board Development Board CC2530F256 Serial Port Wireless Module 2.4GHz Zigbee  

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.