Bicycle Light USB Charging Outdoor LED Riding Lamp Set, Style: Front Light+Tail Light

Front Light Features: 1. Strong battery life, bright LED lamp beads, aluminum alloy material, waterproof, memory mode, anti-glare light 2. The large wide-angle floodlight design greatly widens the lighting angle, and there is no dead angle in the front wheel area. You can see clearly from riding corners to street corners 3. Anti-glare design, aluminum alloy cover design, prevent light reflection from irritating rider eyes 4. The shell is made of aluminum alloy, which is strong and resistant to falling, high and low temperature, and can be used normally even if it is exposed to the sun for a long time 5. Five-level lighting, one-button switching, high-efficiency circuit, long-lasting battery life Tail Light Features: 1. 16 SMD red LEDs, warning lighting at night 2. 180-degree wide-angle irradiation surface, 4 red warning lights on the left and right sides, allowing the light source to emit from both sides of the housing, realizing a 180-degree wide-range warning, reminding you to avoid vehicles coming from the side 3. 6 levels of lighting, one-button switching, to meet the needs of different riding scenes 4. IPX6 protection, not afraid of wind and rain, completely prevent dust and mud from entering, effectively resist heavy rain or strong water splashing, and still work normally 5. Easy to install and remove, the silicone can stretch 95-160mm in length, and only one silicone strap can fix the bicycle light Parameter 1. Bulb type: Front light: 2 x XPG2 lamp beads; Tail light: 16 SMD red LEDs 2. Irradiation distance: 100-200 meters 3. Lumens: 300 lumens 4. Charge and discharge protection: built-in overcharge and overdischarge IC to prolong battery life 5. Charging interface type: TYPE-C/USB-C USB charging port 6. Charging indication: the red indicator light flashes slowly when charging; the red indicator light is always on when fully charged 7. Front light mode: high-medium-low-SOS-warning flash 8. Tail light mode: high-medium-low-slow flash-fast flash-marquee 9. Switch: Click to open, click the gear cycle, press and hold for 2 seconds to shut down, and turn off the mode after turning on the memory 10. Charging voltage: 5V/1A 11. Barrel material: aluminum alloy (wear-resistant anodized) 12. Charging time: 2-3 hours 13. Battery life: 2.5-15 hours for front lights; 5-42 hours for tail lights 14. Power supply mode: front light: built-in 500-capacity polymer battery, tail light: built-in 500-capacity polymer battery 15. Switch type: lamp head push switch 16. Waterproof grade: IPX6 17. Packing list: host + USB cable + silicone strap + manual + packing box 18. Size: 4.3 x 2.4 x 2.8cm 19. Net weight: 36g