Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module — image 1
Hover to zoom

AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module

34+ bought in past month
AI Summary
Buck Converter for everyday users

The AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module is a value-for-money buck converter designed for everyday users. It features Model No. / Name: Power Supply Module and Output Current (mA): 800.

₹537
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹537
Buying tip: A smart budget buy — solid performance without breaking the bank.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model No. / Name: Power Supply Module
Output Current (mA): 800
Output Voltage: 3.3 ~ 5
Length (mm): 13
Width (mm): 9
Shipping Weight: 0.002 kg

Ideal For

Everyday convenience
Share:
SKU: robu-1926217Category: Buck Converter

About This Product

The AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module is a value-for-money buck converter designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model No. / Name: Power Supply Module
  • Output Current (mA): 800
  • Output Voltage: 3.3 ~ 5 — works with standard household power
  • Length (mm): 13
  • Width (mm): 9
  • Shipping Weight: 0.002 kg
  • Shipping Dimensions: 4 × 4 × 1 cm

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

This module is basically the Breakout Board for the AMS1117 IC Chip. The AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module is capable of supplying very stable 3.3V-5V DC when supplied with 4.5V-15V DC. The module is capable of altering the output of the power source/supply before supplying it to the load so as to deliver the specified power to your load. The module is very useful for products that demand 3.3V at 800mA of current. It equips 3 pins where you can plug in input and output, This offers ease of connection. Perfect for providing support power for your electronic design, every DIY hobbyist should have a couple of these flexible power supplies on their electronics workbench.

Features :

  1. Onboard AMS1117 chip
  2. Onboard power indicator to indicate power is turned on: Red LED
  3. Output voltage interface, connection to facilitate the experimental
  4. Small Compact Size, 3Pin Type, Breadboard Friendly

Package Includes :

1 x AMS1117-5.0 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.