Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
3.5 inch LCD TFT Touchscreen Display Touch Shield with Stylus Pen for Raspberry Pi — image 1
Hover to zoom

1 / 6 · Click to enlarge

3.5 inch LCD TFT Touchscreen Display Touch Shield with Stylus Pen for Raspberry Pi

3.01 rating
AI Summary
Raspberry Pi & Orange Pi for everyday users

The 3.5 inch LCD TFT Touchscreen Display Touch Shield with Stylus Pen for Raspberry Pi is a mid-range raspberry pi & orange pi designed for everyday users. It features Model: C0278 and Size: 8.6*5.6*2cm.

₹2,491
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹2,491
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 25 Aug8 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Model: C0278
Size: 8.6*5.6*2cm
Weight: 51g
LCD Interface: SPI
Touch Screen Controller: XPT2046
LCD Type: TFT

Ideal For

Everyday convenience
Share:
SKU: S-DIY0201Category: Raspberry Pi & Orange Pi

About This Product

The 3.5 inch LCD TFT Touchscreen Display Touch Shield with Stylus Pen for Raspberry Pi is a mid-range raspberry pi & orange pi designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Model: C0278
  • Size: 8.6*5.6*2cm
  • Weight: 51g
  • LCD Interface: SPI — compatible with modern devices
  • Touch Screen Controller: XPT2046
  • LCD Type: TFT
  • Resolution: 320*480 DOTS
  • Core System: Vision 3.18.9

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

About the Product This 3.5 inch touch screen module is designed especially for Raspberry Pi, using the latest Linux Core system (vision 3.18.9), the latest Raspberry Pi official UI desktop file system and the fastest SPI transmission data, an ideal alternative solution for HDMI monitor and convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime. Features 1. LCD Interface: SPI. 2. Touch Screen Controller: XPT2046. 3. Backlight: LED. 4. LCD Type: TFT. 5. Resolution: 320*480 DOTS. 6. Core System: vision 3.18.9. 7. SPI Speed: 32MHz. 8. Color Levels Index: 65536. 9. Power Consumption/Backlight Current: TBD. 10. Supports Raspbian system, enables your system to: - Play videos (supports multi formats, MP4 and so on). - Take photos by touching (up to 17 camera modes). - Support software keyboard (system interaction without keyboard/mouse). - Support driver is installed automatically.

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.