Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
12V To 5V USB Car Power Charger Adapter Step Down Module DC-DC Converter for GPS / Vehicle Recorder — image 1
Hover to zoom

1 / 6 · Click to enlarge

12V To 5V USB Car Power Charger Adapter Step Down Module DC-DC Converter for GPS / Vehicle Recorder

Phone Model
AI Summary
Other Car Electronics for everyday users

The 12V To 5V USB Car Power Charger Adapter Step Down Module DC-DC Converter for GPS / Vehicle Recorder is a mid-range other car electronics designed for everyday users. It features Material: ABS and Input Voltage: 12V.

USB rechargeable
₹1,681
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,681
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 26 Aug9 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Material: ABS
Input Voltage: 12V
Output Voltage: 5V
Rated Output Current: 3A
Size: 4.6*2.6*1.4cm
Weight: 40g

Ideal For

Everyday convenience
Share:
SKU: S-S-DIY-1231Category: Other Car Electronics

About This Product

The 12V To 5V USB Car Power Charger Adapter Step Down Module DC-DC Converter for GPS / Vehicle Recorder is a mid-range other car electronics designed for everyday users. It delivers reliable performance at an accessible price.

Key Specifications

  • Material: ABS — built to last with a quality finish
  • Input Voltage: 12V — works with standard household power
  • Output Voltage: 5V — works with standard household power
  • Rated Output Current: 3A
  • Size: 4.6*2.6*1.4cm
  • Weight: 40g
  • One Package Weight: 0.05kgs / 0.12lb
  • One Package Size: 13cm * 9cm * 2cm / 5.12inch * 3.54inch * 0.79inch

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. Light weight and ultra-compact size 2. Full power, synchronous rectification, efficiency conversion rate: more than 90% 3. Built-in over/under-voltage input, overload, over-heat and short circuit fully protection 4. Auto-recovery when converter is back to normal operating 5. Stable and reliable performance 6. Easy and simple installation

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.